EPCOM Certified Products
We test, inspect and restore all EPCOM products to working conditions.
Stock | Classification | Your Price |
---|
Optional Accessories
Product Specifications
DESCRIPTION
The FCPS-24FS6 from Fire-Lite Alarms is a compact, cost-effective, 6-amp remote NAC Extender power supply and battery charger. It is designed to extend the power capabilities of existing Notification Appliance Circuits (NAC’S) and support ADA requirements by offering NAC synchronization and auxiliary power to support 24-volt system accessories. It may be connected to any 12 or 24-volt Fire Alarm Control Panel (FACP) or it can be used for standalone applications.
FCPS-24FS6 Features and Benefits
NOTE: Unless otherwise specified, the term FCPS-24FS6 refers to the standard FCPS-24FS6, FCPS-24FS6C, FCPS-24FS6E power supplies.
- 6-amp full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864).
- 4-amp continuous output in stand-alone mode (UL 1481).
- Built-in Strobe Synchronization with System Sensor, Wheelock, or Gentex appliances for ADA Compliance.
- Strobe signal "passes through" allowing syncing of large systems.
- The instantaneous switchover to standby battery (if equipped) when AC fails, maintaining power to all attached devices without intervention.
- LED lights for quick and easy diagnosis, troubleshooting, and status indication.
- Two outputs can be used for constant power devices such as door holders (power drops upon alarm).
- Contains two fully-isolated input/control circuits for added flexibility.
- Fully regulated and filtered power output - optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power.
Fully supervised power supply, battery, and NACs for added reliability.
- Listing UL and NFPA
- Total charge output of 6 amps, with 4 NAC circuits of max 3 amps each, in the extensor mode of NAC
- Continuous output of 4 amps in autonomous mode
- Built-in synchronization of strobes and appliances System Sensor, Wheelock or Gentex to comply with the ADA norms
- The strobe signal “transfers”, which allows the synchronization of extensive systems
- Instant commuting to the battery when the AC energy is flawed and it maintains the energy in all the incorporated devices without intervention
- LED lights for an easy and fast diagnostic, problem solutions and status indication
- Can make use of two outputs for constant power devices
- Contains two circuits of control/input completely isolated to add flexibility
- Energy output completely filtered and regulated, optimized to trigger 4 wire smoke detectors, announcers and other peripheral systems
- Energy supply, battery, and NAC fully supervised
- Power supply: 120 Vca
- Consumption: 3.2 A
- Dimensions: 381 x 368 x 69 mm