EPCOM Certified Products
We test, inspect and restore all EPCOM products to working conditions.
Stock | Classification | Your Price |
---|
Product Specifications
Features
- With an 18 mm (.705”) diameter stainless steel bolt pin and reinforced strike design, the YG80 has a holding force of 11,240 lbs.
- Concealed mounting bolts under the lock’s cover, which cannot be removed without triggering the tamper detection monitor.
- Completely weatherproof. Ingress protection to IP67.
- Aluminum lock body for superior corrosion resistance.
- Built-in heater for continued functionality in colder climates, the YG80 can handle any environment it is placed in.
- Complete Monitoring – YG80 can truly become a part of the access control system, with a range of output signals including: bolt locked and unlocked position, door position, and tamper detection.
- Low current consumption.
- With the heater disabled, the YG80 will draw as little as 50 mA in standby, and only 1,000 mA in operation at 12VDC. (Heater @24VDC only).
- Integrated access control system capabilities.
- Selectable fail safe / fail secure modes, three user selectable control methods, and multiple attempts to lock or unlock, ensures that the YG80 is ready for a wide range of application requirements.
- A symmetrical design means the YG80 can be installed both horizontally and vertically, in indoor and outdoor environments.
- The included 3 meter (9.04’) flying cable ensures easy connection for all the monitoring, control and the 12-24VDC power supply.
Specifications
- Door gap – 15 mm (.590”) Max
- Static strength – 11,240 lbs.
- Dynamic strength – 148 ft-lbs.
- Endurance – 300,000 cycles
- Voltage at lock – 12-24 VDC +/- 15%
- Auto relock – Will attempt to lock or unlock 3 times if obstructed during operation
- Current usage – Standby current: 50mA @12V; 40mA @24V; 1.6A @24V with heater on. Maximum current: 1.0A@12V; 0.5A @24V; 2.0A@24V with heater on
- Monitor switch ratings – 24VDC, 0.25A
Environment:
- IP67 Rating – suitable for indoor and outdoor use
- Cold - – 35 degrees C
- Dry heat - +70 degrees C
- Corrosion – 240 hours salt spray
- Certifications and listings: FCC – Title 47, part 15, subparts A & B – Class B device ISED (IC) – ICES-003 – Class B device UL – UL294, CSA 22.2 No 204, CE – EMC 2014/30/EU, RoHS 2011/65/EU