EPCOM Certified Products
We test, inspect and restore all EPCOM products to working conditions.
Stock | Classification | Your Price |
---|
Product Specifications
The iGSMCFP4G is a UL approved dual technology fire alarm communicator that offers contact ID reporting with select VISTA® control panels. It offers three selectable reporting paths which include: cellular only, IP only, or IP primary/cellular backup. The iGSMCFP4G transmits all VISTA control panel events via Contact ID to the AlarmNet® Network Operating Center for routing to the assigned central station receiver. The state of the art AlarmNet Network Operating Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery. The iGSMCFP4G meets UL 864 requirements and provides programmable supervision options to meet NFPA72 2010 and 2013 standards using single or dual technologies.
FEATURES:
• Single or Dual Path Communications – Communicates using Internet, Cellular, or both
• Multi-GSM Platform Compatibility:
– 2G, 3G and 4G
– Operates over the following communication protocols:
HSPA+ (4G), HSPA (HSDPA & HSUPA) (3G), EDGE (2G), GPRS (2G)
• IP Communications – Works over any type of customer provided Ethernet 10/100
– Base network connection (LAN or WAN), DSL modem or cable modem
– Supports both dynamic (DHCP), or public and private static IP addressing
• Full Contact ID or ADEMCO® High-Speed Reporting
– Contact ID reporting using ECP mode with compatible Honeywell control panels
• 256-bit AES Encryption – Advanced encryption standard used for secure communications
• Upload/Download – Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
• Diagnostic LEDs – Provide signal strength and status indications
• QOS – Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path
• Web-Based or Local Programming – Allows complete interactive programming from AlarmNet Direct.https://services.alarmnet.com or local programming with 7720P hand-held programmer